The pump inside the project box with the top on.

I'm always worried that lifting up my water gerry can to add water to my fresh water tank will cause me back problems during a camping trip. The mod will pump water from the cans into the tank.

Gallery pages: 1 2 >

< 7 of 12 >

He Ruide > Typically I add water to the tank by holding up this 5 gallon container. Yes it look easy when it it empty but no so when it is full with water.

He Ruide > I though about using a dreill pump but this pump was too slow.

He Ruide > So the alternative was this 12 volt pump. Some of the parts are: 12 volt pump, PVC pipe, garden hose and fitings.

He Ruide > I found a plastic box at Radio shack that I have mounded the pump inside. This also shows the other fitting I'm using.

He Ruide > This is the pump mounted under the PUP with the cover off.

He Ruide > The pump inside the project box with the top on.

He Ruide > Two switches. The one on the left is for the water transfer pump. The one on the right is for the fridge fan.

He Ruide > I tapped into the 12 volt wires that are in the fridge compartment...

The pump inside the project box with the top on.

Other sizes: Small • M • L • O • save photo |

Share photo: links, forums, blogs |

Gallery pages: 1 2 >

< 7 of 12 >

Comments

New comment: Requires approval

Name: Email: Link:

Connect with Facebook

Comment on: | Rating: stars

To foil spammers, enter this code:

in this box: Code unreadable?

Available Feeds | What are feeds?

Gallery Photos:

Atom |

RSS