Drill raising and lowering the roof. Please use the torgue handle and the drill might cause damage to your wrist. - He Ruide's Photos

Gallery pages: 1 2 >

< 2 of 16 >

He Ruide > From left to right the adapters are:

1. 1/2" to 3/8" adapter for the 13mm socket
2. 1/4" hex to 1/2" adapter for the 3/4" socket, modified 16mm socket and extension rod
3. 13mm socket with a hole drilled for the tongue jack
4. 3/4 " socket for the BAL level and stabilizers
5. 16mm socket with a slot cut in it for the roof jack
6. 1/2" Extension rod

I've modified the XRP drill and replaced the key less chuck with one that uses a key.

He Ruide > Drill raising and lowering the roof. Please use the torgue handle and the drill might cause damage to your wrist.

He Ruide > Modified 16mm socket. The slot was cut using a circular saw with a metal cutting blade.

He Ruide > Drill raising and lowering the tongue jack.

He Ruide > Close up of the tougue jack socket.

He Ruide > Drill rainsing and lower the stablizer.

He Ruide > Drill raising and lowering the BAL leveler.

He Ruide > DeWalt XRP (DC 920 KA) 18 volt drill photo

He Ruide > Drill and pump filling the water tank.

Drill raising and lowering the roof. Please use the torgue handle and the drill might cause damage to your wrist.

> Drill raising and lowering the roof. Please use the torgue handle and the drill might cause damage to your wrist.

Drill raising and lowering the roof. Please use the torgue handle and the drill might cause damage to your wrist.

Other sizes: Small • M • L • O • save photo |

Share photo: links, forums, blogs |

Keywords: drill

Gallery pages: 1 2 >

< 2 of 16 >

Comments

|

New comment: Requires approval

Name: Email: Link:

Connect with Facebook

Comment on: | Rating: stars

To foil spammers, enter this code:

in this box: Code unreadable?

Available Feeds | What are feeds?

Gallery Photos:

Atom |

RSS