SmugMug
Home | Login | Help |
 
|
|View Cart
He Ruide  > Tools and Equipment (look at security and safety for additional equipment) > DeWalt XRP (DC 920 KA) 18 volt drill
Gallery pages:  1  2  >  
< 5 of 16 >
He Ruide > From left to right the adapters are: 1. 1/2" to 3/8" adapter for the 13mm socket 2. 1/4" hex to 1/2" adapter for the 3/4" socket, modified 16mm socket and extension rod 3. 13mm socket with a hole drilled for the tongue jack 4. 3/4 " socket for the BAL level and stabilizers 5. 16mm socket with a slot cut in it for the roof jack 6. 1/2" Extension rod I've modified the XRP drill and replaced the key less chuck with one that uses a key.
He Ruide > Drill raising and lowering the roof. Please use the torgue handle and the drill might cause damage to your wrist.
He Ruide > Modified 16mm socket. The slot was cut using a circular saw with a metal cutting blade.
He Ruide > Drill raising and lowering the tongue jack.
He Ruide > Close up of the tougue jack socket.
He Ruide > Drill rainsing and lower the stablizer.
He Ruide > Drill raising and lowering the BAL leveler.
He Ruide > DeWalt XRP (DC 920 KA) 18 volt drill photo
He Ruide > Drill and pump filling the water tank.
Close up of the tougue jack socket.
> Close up of the tougue jack socket.
Close up of the tougue jack socket.
Other sizes: Small • M • L • O • save photo |
Share photo: links, forums, blogs |
Keywords: drill
Gallery pages:  1  2  >  
< 5 of 16 >

Comments

| hide gallery comments |

New comment: Requires approval

Name: Email: Link:
Connect  Connect with Facebook


Comment on: | Rating: stars
To foil spammers, enter this code: copy this text in this box: Code unreadable?



News | Browse | Keywords | Communities | Forum | Wiki | ClubSmug | Prints & Gifts | Shopping Cart | Login
Terms | Privacy | About Us | Contact SmugMug | Blogs | API | Affiliates | © 2009 SmugMug, Inc.
Show FeedsAvailable Feeds | What are feeds?
Gallery Photos:
Atom FeedAtom | RSS FeedRSS