He Ruide : photos : Storage of wasterwater hose and connection

I needed an easy way to carry the hose and connections to and from the dump station.

Gallery pages: 1

< 1 of 6 >

He Ruide > This is a commercial hose carrier. However, it was too long and since I wanted to mount it to the wastewater tank, I would have to bore hole in the tank (which I did not think was a good idea. So I decided to build my own carrier.

He Ruide > The parts - PVC pipe, two slip/thread adapters, one end cap, straps (I ended up using a ratched type strap), and sewer hose with sewer drain adapter.

He Ruide > I cut four sections in the PVC pipe that threaded the straps through the slits.

He Ruide > The finish tube. Note the sewer drain adapter screws into the end of the PVC pipe.

He Ruide > Gray water tank on the E3 deck.

He Ruide > This is the blue tote attached to the ball hitch when you need to haul it to and from the dump station.

This is a commercial hose carrier. However, it was too long and since I wanted to mount it to the wastewater tank, I would have to bore hole in the tank (which I did not think was a good idea. So I decided to build my own carrier.

Other sizes: Small • M • L • O • save photo |

Share photo: links, forums, blogs |

Gallery pages: 1

< 1 of 6 >

Comments

New comment: Requires approval

Name: Email: Link:

Connect with Facebook

Comment on: | Rating: stars

To foil spammers, enter this code:

in this box: Code unreadable?

Available Feeds | What are feeds?

Gallery Photos:

Atom |

RSS