Torquing lug nuts - NEW

These are the tools you will need. The top is a lug wrench. In the middle is a torque wrench. At the bottom are lug nut socket and i/2 inch extension bar.

2009-01-02T14:47:06Z

He Ruide
These are the tools you will need. The top is a lug wrench. In the middle is a torque wrench. At the bottom are lug nut socket and i/2 inch extension bar.

These are two different torque wrenches. The top one is a Craftsman while the bottom one is an inexpensive one from Harbor Freight.

2009-01-02T14:50:41Z

He Ruide
These are two different torque wrenches. The top one is a Craftsman while the bottom one is an inexpensive one from Harbor Freight.

Both torque wrenches have markings on the shaft with the pound/kilograms of force. For example the shaft marking goes up in increments of 10 pounds. The top of the handle has makings from 0 ...

2009-11-02T23:17:16Z

He Ruide
Both torque wrenches have markings on the shaft with the pound/kilograms of force. For example the shaft marking goes up in increments of 10 pounds. The top of the handle has makings from 0 ...

Use a lug tool to loosen the lug nuts. You should not use the torque wrench to loosen the lugs or as a socket wrench. Also do not torque a wheel that is hot.

2009-01-03T00:04:25Z

He Ruide
Use a lug tool to loosen the lug nuts. You should not use the torque wrench to loosen the lugs or as a socket wrench. Also do not torque a wheel that is hot.

Hand tighten the lugs.

2009-01-02T14:54:46Z

He Ruide
Hand tighten the lugs.

Turn the locking ring anti-clockwise to loose the handle.

2009-01-03T00:07:04Z

He Ruide
Turn the locking ring anti-clockwise to loose the handle.

Turn the handle until the zero on the handle lines up with the 10 pound graduation (e.g. 20 pound). If needed continue turning the handle to increase the force by one pound increments.

2009-01-03T00:10:52Z

He Ruide
Turn the handle until the zero on the handle lines up with the 10 pound graduation (e.g. 20 pound). If needed continue turning the handle to increase the force by one pound increments.

Turn the locking ring clockwise to lock the handle in place.

2009-01-02T15:21:45Z

He Ruide
Turn the locking ring clockwise to lock the handle in place.

Torque sequence Stage 1 - Fleetwood recomends 20 to 25 foot pounds for all steel and aluminum wheels. Gently turn the wrench until you hear/feel a click. At this point you have torque the lu ...

2009-01-03T00:09:22Z

He Ruide
Torque sequence Stage 1 - Fleetwood recomends 20 to 25 foot pounds for all steel and aluminum wheels. Gently turn the wrench until you hear/feel a click. At this point you have torque the lu ...

Continue tigthen all the other lugs using the numbered sequence.

2009-01-02T13:31:02Z

He Ruide
Continue tigthen all the other lugs using the numbered sequence.

Torque sequence Stage 2. Loosen the locking ring and increase the torque setting. Fleetwood recomends the following torque: Steel wheels 10 inch - 35 to 40 pounds 12 inch - 35 to 40 p ...

2009-06-12T19:01:01Z

He Ruide
Torque sequence Stage 2. Loosen the locking ring and increase the torque setting. Fleetwood recomends the following torque: Steel wheels 10 inch - 35 to 40 pounds 12 inch - 35 to 40 p ...

Gently turn the wrench until you hear/feel a click. Stop turning and the wrench will reset itself.

2009-01-03T00:05:16Z

He Ruide
Gently turn the wrench until you hear/feel a click. Stop turning and the wrench will reset itself.

Torque sequence Stage 3. Loosen the locking ring and increase the torque. Fleetwood recomends the following torque: Steel wheels 10 inch - 75 pounds 12 inch - 75 pounds 13 inch - 7 ...

2009-01-02T19:36:07Z

He Ruide
Torque sequence Stage 3. Loosen the locking ring and increase the torque. Fleetwood recomends the following torque: Steel wheels 10 inch - 75 pounds 12 inch - 75 pounds 13 inch - 7 ...

Gently turn the wrench until you hear/feel a click. Stop turning and the wrench will reset itself.

2009-01-02T19:51:42Z

He Ruide
Gently turn the wrench until you hear/feel a click. Stop turning and the wrench will reset itself.

Repeat the process for the other wheel(s)

2009-01-03T00:08:09Z

He Ruide
Repeat the process for the other wheel(s)

Loosen the locking ring and turn the torque back to the minimum setting. Clean and store where the wrench will not be damaged.

2009-01-03T00:01:26Z

He Ruide
Loosen the locking ring and turn the torque back to the minimum setting. Clean and store where the wrench will not be damaged.