The first step is to remove the awning ropes on in my case the bungee cord and take the awning stake out of the ground.
With the bunkend in you then lower the roof to the half way point.
At this point you should be able to reach the poles.
Remove each of the horizontal poles first from the canvas loop
Lay each horizontal pole on the ground and move the vertical pole closer to the trailer so it support the awning.
Slide each of the horizontal throught the canvas loops.
Now comes the hard part. While holding the end of the awning in one hand, shorten each of the vertical poles so they fit into the channel.
Roll up the awning. Once you have it rolled up and into the bag you can move to the end of the bag and start zipping it close.(please ignore the awning pole in this photograph. It was take to explain how the tip fits into channel.)
Once the awing is in place you can lower the roof all the way down.