DeWalt XRP (DC 920 KA) 18 volt drill - he-ruide
From left to right the adapters are:

1. 1/2" to 3/8" adapter for the 13mm socket
2. 1/4" hex to 1/2" adapter for the 3/4" socket, modified 16mm socket and extension rod
3. 13mm socket with a hole drilled for the tongue jack
4. 3/4 " socket for the BAL level and stabilizers
5. 16mm socket with a slot cut in it for the roof jack
6. 1/2" Extension rod
 
I've modified the XRP drill and replaced the key less chuck with one that uses a key.

From left to right the adapters are:

1. 1/2" to 3/8" adapter for the 13mm socket
2. 1/4" hex to 1/2" adapter for the 3/4" socket, modified 16mm socket and extension rod
3. 13mm socket with a hole drilled for the tongue jack
4. 3/4 " socket for the BAL level and stabilizers
5. 16mm socket with a slot cut in it for the roof jack
6. 1/2" Extension rod

I've modified the XRP drill and replaced the key less chuck with one that uses a key.

drill015